Computer

Tips to Saving Your Computer When It Gets Wet

A lot of people who use their computers on a regular basis find themselves wondering “what do I do now that my computer got wet?” Wet hard drives happen all the time and it’s not as if you get them when you don’t expect them to. The following tips to saving your computer when it gets wet are designed to help keep your computer running smoothly again so that you don’t have to worry about losing any important files or programs. 

When your computer has fallen into a pool of water, there will be some noticeable damage to the internal parts. This is the first and the foremost thing that you have to do when you want to know “what do I do now that my computer got wet?” You have to turn off the main power to your computer and remove all of its accessories such as the monitor and keyboard. If your computer was sitting in a moist environment for a long time, you’ll have to take all of its batteries out, as well as its main power cable, before you even attempt to salvage your computer. Doing this can help minimize the water damage. 

First and foremost, you have to be sure that your computer’s hard drive has not been completely destroyed. You have to make sure that the internal components of your computer like the motherboard did not get fried. Generally with a lot of residue it probably is not salvageable. With severe damage, your computer will more than likely become damaged due to a short in the power cord. The power cord is connected to the wall socket through a large fuse box, and unfortunately this can often result in damage of the electronic components in the computer. 

Read More:   The Best Emulators for PCs
Tips to Saving Your Computer When It Gets Wet

If your computer got wet due to some other cause, such as being exposed to water or humidity for a long period of time, the first thing that you have to do is to turn your computer off. It’s understandable that you want to keep your computer for a few days to test it out, but in most cases it’s best to shut it down permanently to prevent further damage to your computer. Another reason why shutting it down is important is because it prevents any other damage that may occur to the hard drive if you attempt to saving your computer when it gets wet. 

If you do not shut down your computer and attempt to salvage your computer when it gets wet, there are two possibilities: the computer might get completely destroyed, or you might end up damaging the parts inside of your computer beyond repair. If the computer got wet partially due to water leaking from a broken pipe somewhere around your house, you’re in luck. Now would be a good time to hire a professional to check for any water leaks, or clogged leak piping. Plumbers can help with anything like checking the hot water in Canberra, detecting water leaks, clogged drains and everything plumbing related. 

 Even if you didn’t find any leaking pipes near your house, the likelihood that water is leaking somewhere inside your computer is extremely high. You will have to take your computer to an authorized service center in order to have someone look at the problem for you. The only real downside here is that you’ll be paying someone to fix your computer, which can get expensive. 

Read More:   How to Create Windows 7 Recovery Disk for Another Computer?

If the computer got wet partly because it was exposed to water in the first place, you’re in luck. There are several different types of damage that could cause your computer to become

damaged, and it’s likely that you’ll be able to salvage your computer even if you’ve just dealt with a flood or two. One example of this is cracked screen damage. If your screen cracked due to water leaking in from a broken pipe in your house, your computer probably won’t be damaged so easily. 

However, the same cannot be said about cases where the computer shut down accidentally. If your computer shut down because it was being submerged in a puddle of water, you might have some issues. The first thing that you need to do if you’re going to try to saving your computer when it gets wet is to remove the battery from your computer and thoroughly dry it out. After you’ve done this, remove all of the hardware and see what’s left. You’ll more than likely find that the hard drive is almost fully ruined, and you’ll have to replace it. Make sure that you keep the rest of your computer safe while you’re trying to save your data! Taking it to a repair professional will be your best bet. They have tools and machinery that can help you get your computer back. If that doesn’t work, sometimes they can extract the important information from their own software. 

When you’re dealing with a computer that’s been wet for any length of time, you have to be careful. Never turn your computer on while it’s getting wet. The water could potentially damage parts of the hard drive, which would make your computer useless. It’s always best to prevent damage than to try to repair it after it has already occurred. 

Read More:   7 Tips to Protect Data on Your PC

Rose

Rose is a technology enthusiast and a writer. She had the interest to write articles related to technology, software, Mobiles, Gadgets and many more.

Leave a Reply